Skip to product information
ZIPPY EMACS Model: HP2-6500P 500W ATX Active PFC Power Supply
  • ZIPPY EMACS Model: HP2-6500P 500W ATX Active PFC Power Supply
  • ZIPPY EMACS Model: HP2-6500P 500W ATX Active PFC Power Supply
ZIPPY EMACS Model: HP2-6500P 500W ATX Active PFC Power Supply
$244.00 $250.00
Dimension：140.00x150.00x86.00 (mm) / 5.51x5.91x3.39 (inch)

Connectors:

1 x Main connector (24-pin)
1 x 12V(P4)
1 x EPS(8Pin)
7 x peripheral
1 x PCIE(6Pin)
1 x Floppy

Output Voltage Output Current Min. Output Current Max. Output Current Peak Regulation Load Regulation Line Output Ripple & Noise Max.[P-P]
5V 2.5 40.00
5% 1% 60mV
12V 1 32
5% 1% 100mV
-5V 0 0.8
5% 1% 100mV
-12V 0 1
5% 1% 100mV
3.3V 1 30
+5, -5% 1% 60mV
+5VSB 0.1 2
5% 1% 60mV





















REMARKS:*TOTAL OUTPUT NOT EXCEED 500W ** WHEN IT PERFORMS CROSS REGULATIONTEST, IT IS REQUESTED TO SET THE HIGHER OUTPUT CHANNEL AT 90% MAX. OFITS SPEC., AND THE LOWER OUTPUT CHANNELS AT 20% MIN. OF THEIRS

*ACTIVE PFC (FULL RANGE)
*12V MAX. CURRENT: 32A
*TEMPERATURE RANGE : OPERATING 0℃ ~ 40℃, STORAGE ?20℃ ~ 70℃
* HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
* REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATINGPROCESS
*EMI : MEET FCC CLASS B, CISPR22 CLASS B
*SAFETY: UL, CUL, TUV
*COOLING: ONE 80 mm DC FAN
*FAN SPEED CONTROL(OPTIONAL)
*BUILT-IN ACTIVE POWER FACTOR CORRECTOR
*SERIAL ATA OPTIONAL

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BEOPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITHCORRESPONDING EMC- AND SAFETY-REGULATIONS.

You may also like