> AC Input:
- VOLTAGE: 100～240V, (115/230 auto)
- FREQUENCY: 50/60Hz
- INPUT CURRENT: 8A/4A For 115/230VAC
- INRUSH CURRENT: 60A/80A MAX FOR 115/230

OUTPUT VOLTAGE	OUTPUT CURRENT		REGULATION		OUTPUT
	MIN(A)	MAX(A)	LOAD	LINE	RIPPLE & NOISE MAX.[P-P]
+5V	3	42	5%	1%	50mV
+12V	2	28	5%	1%	120mV
-5V	0.1	0.5	10%	1%	150mV
-12V	0.1	0.8	10%	1%	150mV
+3.3V	1	24	5%	1%	50mV
+5VSB	0.1	2	5%	1%	50mV

The combined output power +5V&+3.3V shall not exceed 210W.
The total power shall not exceed 500W.

> DIMENSION: D199 X W150 X H86mm
> COOLING: By forced air 2x40mm Fan (Each module)
> TEMPERATURE RANGE: Operation 0˚C～50˚C
> HOLD UP TIME: 16ms at maximum load & normal input voltage
> EFFICIENCY: 67% TYPICAL(Normal Line)
> ATX 12V / EPS 12V
> POWER GOOD SIGNAL: Should be asserted high to indicate that+5VDCand +3.3VDC
   output are above the low voltage thresholds.Compatible signal out with 100ms to 500ms.
> OVER POWER PROTECTION: The power supply shall shout down outputpower exceeds 130% to 160%
> OVER VOLTAGE PROTECTION: Standard on +5.0V, set at 6.25VDC 0.75VDC
> SHORT CIRCUIT PROTECTION: A short circuit placed between the DCreturn and
   the output shall cause no damage and the power supplyshall shutdown.
> EMI: FCC part 15, subpart B, Class B, EN55022 CISPR22 Class B.
> AGENCY APPROVALS: UL60950, CAN/CSA22.2 No.60950, TUV(IEC60950)
> MTBF OF POWER SUPPLY ELECTRONNIS: 100,000 hours. Life expctancy offan 40,000 hours