*TEMPERATURE RANGE: OPERATING 0¢J¡ã40¢J¡ASTORAGE -20¢J¡ã70¢J
* HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
* REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
*HOLD UP TIME: 16mS MIN. AT FULL LOAD & 90 VAC INPUT VOLTAGE
*DIELECTRIC WITHSTAND: INPUT/OUTPUT 1500 VAC FOR 1 minute
INPUT TO FRAME GROUND 1500 VAC FOR 1 minute
*EFFICIENCY: 65% TYPICAL¡AAT FULL LOAD
*POWER GOOD SIGNAL: ON DELAY 100mS TO 500mS¡AOFF DELAY 1mS
*OVER POWER PROTECTION: 110% ~ 150%
*OVER VOLTAGE PROTECTION: +5V -> 5.7V ~ 6.5V, 3.3V -> 3.7V ~ 4.3V +12V -> 13.3V ~ 15V
*SHORT CIRCUIT:5V,12V,3.3V 130%±20% AT FULL LOAD
*EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
*SAFETY: UL 1950, CSA 22.2 NO/ 950, TÜV IEC 950
*REMOTE ON/OFF CONTROL
*FAULTY ALARM METHODS:LED , BUZZER, TTL SIGNAL
*MEET IEC-1000-3-2 CLASS D (ACTIVE PFC)
*HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
*REMOTE SENSING DESIGN
*ISOLATION: BUILT-IN THE POWER MODULE
*COOLING: TWO 38mm DC FAN (MODULE)
*AC INLET IN EACH MODULE

Dimensions:
300.00x101.00x84.00  (mm)
11.81x3.98x3.31  (inch)