Specifications
Zippy M1U2-5650V4H 650W 1U Redundant Server Power Supply
Input Spec VOLTAGE: 90~264VAC
FULL RANGE
FREQUENCY: 47~63HZ
INPUT CURRENT:5A (RMS)FOR 230VAC
10A(RMS)FOR 115VAC
INRUSH CURRENT:15A MAX. FOR 115 VAC PER MODULE
30A MAX. FOR 230 VAC PER MODULE
DC Output Spec
FREQUENCY: 47~63HZ
INPUT CURRENT:5A (RMS)FOR 230VAC
10A(RMS)FOR 115VAC
INRUSH CURRENT:15A MAX. FOR 115 VAC PER MODULE
30A MAX. FOR 230 VAC PER MODULE
DC Output Spec
Output Voltage | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
+5V | 0 | 22 | ±5% | ±1% | 50mV |
+12V | 2 | 54 | ±5% | ±1% | 120mV |
-12V | 0 | 0.5 | ±5% | ±1% | 120mV |
+3.3V | 0 | 22 | ±5% | ±1% | 50mV |
+5VSB | 0.1 | 3 | ±5% | ±1% | 50mV |
Features
* TEMPERATURE RANGE:OPERATING 0℃~50℃,STORAGE -20℃~80℃
* HOLD UP TIME:11mS MIN. AT FULL LOAD & 90 VAC INPUT VOLTAGE
* DIELECTRIC WITHSTAND:INPUT/OUTPUT 1500 VAC FOR 1 MINUTE
* INPUT TO FRAME GROUND 1500 VAC FOR 1 minute
* EFFICIENCY:TYPICAL 85% AT 115V, 12V/54A 5VSB/0.4A; TYPICAL 88% AT 230V, 12V/54A 5VSB/0.4A
* POWER GOOD SIGNAL:ON DELAY 100mS TO 500mS,OFF DELAY 1mS
* OVER POWER PROTECTION:110~150% MAX
* OVER VOLTAGE PROTECTION:+3.3V→3.7~4.1V, +5V→5.7~6.5V, +12V→12.8~13.9V
* SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V
* SAFETY:TO MEET UL, CUL, TUV
* FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL
* MEET IEC-1000-3-2 CLASS D (ACTIVE PFC)
Dimension
355x106x41.3(mm)
13.98x4.17x1.63(inch)