Zippy / Emacs DP1A-6300F1U 300W DC to DC power supply
Zippy / Emacs DP1A-6300F1U 300W DC to DC power supply
Zippy / Emacs DP1A-6300F1U 300W DC to DC power supply
Model: DP1A-6300F
120.00

Specifications
Zippy / Emacs DP1A-6300F1U 300W DC to DC power supply

Dimension:
205x100x40.5
(mm)
80.71x39.37x15.94(inch)

VOLTAGE: RANGE:-36VDC ~ -72VDC
NORMAL:-48VDC
INPUT CURRENT: 10A AT -48 VDC
INRUSH CURRENT : LESS THAN 10A


Output Voltage Output Current Min. Output Current Max. Regulation Load Regulation Line Output Ripple & Noise Max.[P-P]
5V 3.0 24 ± 5% ± 1% 50mV
12V 2.0 20 ± 5% ± 1% 120mV
-5V 0.05 0.5 ± 5% ± 1% 120mV
-12V 0.05 0.5 ± 5% ± 1% 150mV
3.3V 1.0 20 ± 5% ± 1% 80mV
+5VSB 0.1 1.5 ± 5% ± 1% 50mV




















* TEMPERATURE RANGE: OPERATING 0 TO 40 DEGREES CENTIGRADE
* HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
* REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
* HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
* REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
* HOLD UP TIME: 1.6 ms MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE
* DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND
* EFFICIENCY: 65% TYPICAL, AT FULL LOAD
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 110%~150%
* OVER VOLTAGE PROTECTION: +5V → 5.5V ~6.5V, 3.3V →3.9V~5V, 12V→13~15V
* SHORT CIRCUIT PROTECTION: +5V, -5V, +12V, , -12V, +3.3V
* EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
* SAFETY: UL, CSA, TÜV, CCC, GOST
* REMOTE ON / OFF CONTROL
THE UNIT SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE / ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STANDBY), AS LOGIC LEVEL IS LOW, OUTPUTS VOLTAGE WERE ENABLE, AS LOGIC LEVEL IS HIGH, OUTPUTS VOLTAGE WERE DISABLE.
* COOLING: 40mm DC FANS