Sparkle SPI600W7BB-B204-R2 600W ATX12V/EPS12V 2U Power Supply

Specifications

Features

*Complied with ATX12V/ EPS12V standard

*Active Power Factor Correction (PFC) meet EN61000-3-2

*High efficiency and reliability

*Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances).

*Remote ON/OFF function

*Internal 12V DC fan included

*Low noise and ripple

*Output over voltage, short circuit, and over current protection

*100% Hi-pot, ATE, and burn-in tested

*Re-settable power shut down

*Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation

Specification

*Temperature Range: Operating: 0�C ~ +50�C on full load; storage & shipping: -20�C ~ +80�C

*Humidity: 85% on operating, 95% on storage

*Dielectric Withstand: Primary frame ground 1800V AC for 2 second

*Efficiency: Typical over 85%

*Rise time: Less than 20ms

*Hold-up Time: 16 ms minimum at nominal input voltage

*Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)

*Leakage Current: Less than 3.5mA at 264Vac, 50Hz

*MTBF: 100,000 hours on maximum load at +25�C

*Dimensions (LxWxH): 240x100x70mm /9.4x3.9x 2.7 inch

Connector:

1 x 20 + 4 Pin
1 x 4 + 4 Pin 12V P4
1 x 8 Pin EPS 12V
1 x 6 +2 Pin PCIE
4 x 4 Pin Molex
1 x Floppy
2 x SATA