Specification

• Temperature Range:Operating: 0�C ~ +50�C on full load; storage & shipping: -20�C ~ +80�C
• Humidity: 10-90% on operating, 95% on storage
• Dielectric Withstand: Primary frame ground 1800V AC for 1sec
• Efficiency: 82% minimum, typical up to 87%
• Rise Time: Less than 20ms
• Hold-Up Time : 17ms minimum at nominal input voltage
• Power Good Signal : Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
• Leakage Current: Less than 3.5mA at 264Vac, 50Hz
• MTBF: 100,000 hours on maximum load at +25�C
• Dimensions (LxWxH):140x150x86mm / 5.5x5.9x3.4inch

Features:

• Complied with ATX 12 V and EPS12V standard
• Active Power Factor Correction Meeting with EN61000-3-2
• High efficiency and reliability
• Compatible with European Union Directive 2002/95/EC(Restriction on Hazardous Substances).
• Remote ON/OFF function
• Noise Killer (thermal fan speed control function)
• Low noise and ripple
• Internal 12V DC fan included
• Output over voltage, short circuit, and over current protection
• 100% Hi-pot, ATE, and burn-in tested
• Re-settable power shut down
• Complies with FCC part 15 subpart J class B 115Vac operation,and CISPR 22 class B at 230Vac operation
• Approved by CUL/UL60950-1 2nd TUV EN60950-1 2nd, CB 60950-1 2nd report, FCC, EMC

Connectors:
1 x 20 + 4 Pin
1 x 8 Pin EPS
1 x 4 + 4 Pin 12V/EPS
5 x 4 Pin IDE
4 x SATA
2 x 6 +2 Pin PCI-Express
1 x Floppy