Specifications
SPARKLE SPI300F4BB 80 PLUS 300W FLEX ATX Power Supply
Features:
- Complied with ATX12V / EPS12V standard
- Active Power Factor Correction Meeting with EN61000-3-2
- High efficiency and reliability
- Compatible with European Union Directive 2002/95/EC(Restriction on Hazardous Substances).
- Remote ON/OFF function
- Noise Killer (thermal fan speed control function)
- Low noise and ripple
- Internal 12V DC fan included
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
- Approved by UL/CUL 60950-1,EN60950-1
2nd (CB Report) CE ,FCC,EMC report
Specification
- Temperature Range:Operating: Operating: 0.C ~ +50.C; storage & shipping: -20.C ~ +80.C
- Humidity: 90% on operating, 95% on storage
- Dielectric Withstand: Primary frame ground 1800V AC for 1 second
- Efficiency: 82% minimum
- Rise Time: Less than 20ms
- Hold-Up Time : 17ms minimum at nominal input voltage
- Power Good Signal :Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Less than 3.5mA at 264Vac, 50Hz
- MTBF: 100,000 hours on maximum load at +25.C
- Dimensions (LxWxH):150x81.5x40.5mm /5.9x3.2x1.6inch
20+4 Pin X 1
8 pin (4 pin + 4 pin)
Molex 4 pin X 3
FDD X 1
SATA X 2