Features
- Complied with ATX12V/ EPS12V standard
- Active Power Factor Correction (PFC) meet EN61000-3-2
- High efficiency and reliability
- Compatible with European Union Directive 2002/95/EC (Restriction on
Hazardous Substances).
- Remote ON/OFF function
- Internal 12V DC fan included
- Low noise and ripple
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Complies with FCC part 15 subpart J class B 115Vac operation, and

Specifications:
- Temperature Range: Operating: 0°C ~ +50°C on full load;
storage & shipping: -20°C ~ +80°C
-Humidity: 85% on operating, 95% on storage
- Dielectric Withstand: Primary frame ground 1800V AC for
1 second
- Efficiency: Typical up to 85%
- Rise time: Less than 20ms
- Hold-up Time: 16 ms minimum at nominal input voltage
- Power Good Signal: Power on delay time 100 ~ 500ms, off
delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Less than 3.5mA at 264Vac, 50Hz
- MTBF: 100,000 hours on maximum load at +25°C

Dimensions (LxWxH): 240x100x70mm /9.4x3.9x 2.7 inch

Connector:
1 x 24 Pin
1 x 4 + 4 Pin 12V P4
1 x 8 Pin Power
4 x 4 Pin Molex
1 x Floppy
4 x SATA