Shuttle PC63 80 Plus SilentX 500W Power Supply

Specifications

The Shuttle XPC Accessory PC63 provides the additional power for compatible Shuttle XPCs needed to satisfy the demands of high power graphics cards and large capacity storage devices. It is the optimal solution for power users wanting to upgrade without compromising the stability, low-noise, and portability of the XPC.

The power supply supports the following modes:

XPC COMPATIBILITY

SN78SH7, SG45H7, SP45H7, SX58H7

Specifications

Output Wattage	Total combined output: 500W max Total combined out of 3.3V and 5V: 130W max Active PFC circuit (Power Factor Correction)
INPUT VOLTAGE/Frequency Range	100~240V AC, 50/60Hz (90~264V AC, 47~63Hz
INPUT CURRENT	Max. 8A/4A for 115V/230V AC during normal operating Inrush current: 60A/90A for 115V/230V AC
DC voltage output, max. output current	+12V1: 16A +12V2: 16A +12V3: 17A 5VSB: 2.5A (Standby) -12V: 0.3A +3.3V: 18A 5V: 16A
Power Connectors	1 x ATX power 20 pins 1 x ATX 12V power 4+4 pins*) 1 x PCIe power 6 pins 1 x PCIe power 6+2 pins 3 x Serial ATA power 2 x Molex power 1 x Floppy power
Output voltage timing	Hold up time: >17ms as full load at 115V AC Rise time: <20ms at full load, nominal line
Protection	Short circuit protection (SCP) - Latch off Overpower (overload) protection (OPP) Overcurrent protection (OCP) Overtemperature protection (OTP) Overvoltage protection (OVP) Undervoltage protection (UVP)
Efficiency	80PLUS Bronze compliant The PSU provides at least 82/85/82% efficiency at 20/50/100% load
Certification	EMI/RFI: FCC class B, CE, BSMI, CCC Safety: cUL, T�V, CB, BSMI, CCC Timing, housekeeping and control conform Intel ATX12V Specific Guidelines 2.3
Mean Time Between Failures (MTBF)	> 100.000 hours at 75% load, 25�C
Temperature	Operating temperature: +10�C ~ +50�C Storage temperature: -40�C ~ +70�C
Noise	<30dB at 50cm for 200W load Ball bearing fan with thermal Fan-speed control
Dimensions	200 x 82 x 53 mm (L x W x H)
Weight	net weight: 2.5 lb gross weight: 2.7lb