Specifications Model Name FSP500-50FDB UL # 62368-1 Wattage 500W Dimension 150 mm (L) × 80 mm (W) × 40 mm (H) Product Highlight Efficiency Level 80 Plus Gold Altitude 5,000M General Specification Effciency 90% 230VAC Voltage Regulation +3.3V, +12V, +5V, +5SB: ±5% -12V: ±10% Input Electrical Specification Input Frequency 47 ~ 63 Hz Input Current 115V@ 6.0 Amps-rms maximum 230V@ 3.0 Amps-rms maximum Output Specification Hold-up time 115V/60Hz 10mSec. Minimum@100% Load, 230V/50Hz 12mSec. Minimum@100% Load Ouput Voltage Regulation +3.3Vdc output : +3.7 Vdc minimum, + 7Vdc maximum +5Vdc output : +5.7 Vdc minimum, + 7Vdc maximum +12Vdc output : +13.3 Vdc minimum, + 16Vdc maximum Output Rise Time 115V-rms/230V-rms +5V 20ms Maximum Output Rating +3.3V:50mV p-p +5V:50mV p-p +12V:120mV p-p -12V:120mV p-p +5Vsb:50mV p-p Environmental Requirement Temperature Range Operating : 0 to +50℃ Storage :-40 to +80℃ Humidity Operating : 0% to 85% RH, Non-condensing Storage : 0% to 95% RH, Non-condensing MTBF The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25℃, maximum-output load, and nominal AC inout voltage Safety CE,FCC,UL/cUL,TUVOutput Voltage and Current Rating +3.3V +5V +12V1 -12V +5Vsb Ripple-Noise(R-P) mV 50mV 50mV 120mV 120mV 50mV Regulation Load % ±5% ±5% ±5% ±10% ±5% Output Max.(A) 14A 16A 41A 0.3A 3A Output Min.(A) 0A 0A 0.1A 0A 0ANotesThe +3.3V and +5V total output shall not exceed 90 watts. The total output shall not exceed 500 watts Ripple and noise measurements shall be made under all specified load conditions through a single pole low pass filter with 20MHz cutoff frequency. Outputs shall bypassed at the connector with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading.Features • UL#: 62368-1 • Low Ripple & Noise • 100% burn-in under high ambient temperature(50℃) • 100% Hi-pot tested Complies with EN61000-3-2 AC input full range

Dimension	150 mm (L) × 80 mm (W) × 40 mm (H)