Specifications
Enermax Noisetaker Series EG495P-VE SFMA 2.0 485w Power Supply
 |
Smart Fan Function
|
||
|
The
Smart Fan technology was developed by the folks at Enermax to protect your
investment. After your system shutdown, the two ball bearing fans continue
to run for another 2 mins to cool off your power supply and components. It
also has a heat sensor that will allow the fans to run for more then 2
mins if the temp is greater then 40c after the 2 min. This will greatly
increase the life your power supply and components.
|
|||
 |
Dual +12V Rails
|
||
|
Independent 12V rails supply to MB/CPU and drives in order to provide
stable and clean current to noise-sensitive devices, such as: CPU, add-on
cards.Meet UL 240VA safety requirements. It also separate the motherboard
rails and video card rails to |
|||
 |
High Efficiency
|
||
|
High efficiency is achieve by
using using high quality components and the skills of our designer to
maximizes your power supply output and minimize wasted power. Efficiency
is the measure of how much of the 100% power going in to the PSU is being
used up and the unused power dissipate into heat through the heatsink.
Lower efficiency means that more power is being wasted and also the PSU
will generate more heat.
|
|||
 |
Ring Core Technology
|
||
|
Effectively prevents electro-magnetic pulse leaking
from switching power supply to appliances that are being attached to the
same power source, i.e. AC wall plug.
|
|||
 |
Protection
|
||
|
Enermax has one of the highest protection standard
on the market today, due to our advance design we offer the following type
of protections:
OCP-Over Current Protection, UVP-Under Current Protection, OVP- Over Voltage Protection, OLP-Over Load Protection, OTP- Over Temperature Protection, SCP- Short Circuits Protection. |
|||
|
> More Features
|
|||
|
ATX 12V V2.0 Compatible
Support latest P4 Prescott and Athlon 64/64 FX processors based systems: P4 main boards that use 875 (Canterwood) and 865 (Springdale) chipsets, and also fully support power requirements for platforms using chipsets like Intel 925 (Alderwood) or 915 (Grantsdale) and next generation CPU. More info on ATX 12V Ver 2.0 >> S-ATA connectors Connect your system to the faster S-ATA interface for better performance. Manual and automatic fan speed control 8cm & 9cm fans automatically controlled by thermostat plus rheostat control over 8cm fan. Enable users to keep the balance between cooling effect and acoustic noise. PCI Express Graphic Card Power connector Native 6-pin PCI-X power connector provides high-end graphic card with stable current. Dual Fan The best cooling method for PC system, and is strongly suggested by AMD. Silence Acoustic noise is successfully reduced with two fans giving more airflow in less rpm and smooth mechanical design of fan guards. FM functions RPM signal of 8cm exhaust fan is provided |
|||
> Specifications
|
Rails
|
EG495P VE SFMA 2.0
|
EG425P-VE SFMA 2.0
|
||
|---|---|---|---|---|
|
+12v1
|
18A
|
32A
combine pw |
18A
|
29A
combine pw |
|
+12v2
|
18A
|
18A
|
||
|
-12v
|
0.8A
|
0.8A
|
||
|
+5v
|
32A
|
30A
|
||
|
+5v sb
|
2.5A
|
2.5A
|
||
|
+3.3v
|
32A
|
30A
|
||
Model: EG495P-VE SFMA 2.0 , EG425P-VE SFMA 2.0
Maximum Power: 485W, 420W
Input Voltage: 95V~135V or 180V~265V (selected by slide switch)
Input Frequency Range: 47Hz~63Hz
Input Current: 60A 115V/230V max. during cold start
Hold up time: 17ms at 115VAC or 230VAC, full load
Over Voltage Protection: +5V: 5.5V~7.0V; +3.3V:3.76V~4.3V; +12V & +12V2: 13.4V~15.6V
Over Load Protection: 110~160% of max load
Over current Protection: +3.3V : 55A (max); +5V: 48A (max); +12V1 & +12V2: 20A (max)
Over Temperature Protection: Operating Ambient 10ºC~40ºC, Storage Ambient -40ºC~70ºC
Humidity:
Operating : to 85% relative humidity, non condensing at 25ºC
Storage: to 95% relative humidity, non condensing at 50ºC
MTBF: Greater than 100K hours at 70% of full rated load; 230VAC / 50Hz input; 25ºC ambient
EMC: EN55022 Class B, EN61000-4-2 Class B, EN61000-4-3 Class A, EN61000-4-4 Class B, EN61000-4-5 Class B, EN61000-4-6 Class A, EN61000-4-8 Class A, EN61000-4-11 Class B, FCC Part 15 & Part 2, CNS 13438 Class B
Safety: Approval UL, cUL, TÜV, CB
Dimension: W150 x H86 x D140 (mm)
Maximum Power: 485W, 420W
Input Voltage: 95V~135V or 180V~265V (selected by slide switch)
Input Frequency Range: 47Hz~63Hz
Input Current: 60A 115V/230V max. during cold start
Hold up time: 17ms at 115VAC or 230VAC, full load
Over Voltage Protection: +5V: 5.5V~7.0V; +3.3V:3.76V~4.3V; +12V & +12V2: 13.4V~15.6V
Over Load Protection: 110~160% of max load
Over current Protection: +3.3V : 55A (max); +5V: 48A (max); +12V1 & +12V2: 20A (max)
Over Temperature Protection: Operating Ambient 10ºC~40ºC, Storage Ambient -40ºC~70ºC
Humidity:
Operating : to 85% relative humidity, non condensing at 25ºC
Storage: to 95% relative humidity, non condensing at 50ºC
MTBF: Greater than 100K hours at 70% of full rated load; 230VAC / 50Hz input; 25ºC ambient
EMC: EN55022 Class B, EN61000-4-2 Class B, EN61000-4-3 Class A, EN61000-4-4 Class B, EN61000-4-5 Class B, EN61000-4-6 Class A, EN61000-4-8 Class A, EN61000-4-11 Class B, FCC Part 15 & Part 2, CNS 13438 Class B
Safety: Approval UL, cUL, TÜV, CB
Dimension: W150 x H86 x D140 (mm)
|
Cables Layout
|
|||||||
 |
 |
 |
 |
 |
 |
||
| 24 Pins Main Power |
P4 +12V CPU
|
6 Pins PCI Exrpess |
Serial ATA
|
HDD Power |
FDD Power
|
||
 |
Number of Connectors
|
||||||
|
20+4 Pins Main Power: 1 (support 24p and 20p
MB)
P4 +12V CPU: 1 6 Pins PCI Exrpess: 1 Serial ATA: 4 HDD Power:7 FDD Power: 2 Fan Monitor: 1 |
|||||||
|
Fan RPM Monitor
|
|
|
|||||