Specifications
FSP220FEB-B204
- Mfr Part Number: FSP220FEB-B204
- Features:
- Complied with Flex ATX and ATX12V standard
- Active Power Factor Correction (PFC) meet EN61000-3-2
- High efficiency and reliability
- Compatible with European Union Directive 2011/65/EU & (EU)2015/863 (Restriction on Hazardous Substances).
- Remote ON/OFF function
- Internal 12V DC fan included
- Low noise and ripple
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 32 class B at 230Vac operation
- Approved by CB 62368 & 60950-1 2nd , EMC. CUL/UL TUV, FCC, CE
-
- Input:
- Input Range: 90 ~ 264Vac (RMS), Full Range Input
- Frequency: 47 ~ 63Hz
- Input Current: Max 4A(RMS) @ 115Vac, 2A(RMS) @ 230Vac
- Inrush Current: No damage
- Output:
- Total Watts: 220W
- Output Voltage: +3.3V @ 8A,+5V @ 12A, +12V@ 14A, -12V @ 0.3A, +5VSB@ 2.5A
- +3.3V and +5V total output not exceed 61W
- Temperature Range: Operating: 0C ~ +50C; storage : -20C ~ +80C
-
Humidity: 85% RH, Non-condensing on operating, 95%RH, Non-condensing on storage.
- Dielectric Withstand:Primary frame ground 1800V AC for 2 second
- Efficiency: Typical > 85%
-
Altitude: The power supply is applied for tropical climates and use at altitudes not exceeding 5000m above Sea level
-
Standby Power Consumption (5Vsb):
-
Efficiency> 45%@5Vsb/45mA &230Vac input (2013 Lot 6)
-
Efficiency> 55% @ 5Vsb/550mA &230Vac input
-
Efficiency> 70% @ 5Vsb/1A &230Vac input
-
Efficiency > 70% @ 5Vsb/2.5A &230Vac input
-
- Rise Time: Less than 20ms
- Hold-up Time: 16ms minimum at 80% load
- Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Less than 3.5mA at 264Vac, 50Hz
- MTBF: A minimum predicted MTBF (MIL-HDBK-217) of 100,000 hours of continuous operation at +25C
- Dimensions (LxWxH):150x81.5x40.5mm /6x3.2x1.6inch
- RoHS Compliant