Gateway ATX12V Power Supply 300w 120mm For Part Number 6500611
Gateway ATX12V Power Supply 300w 120mm For Part Number 6500611Gateway ATX12V Power Supply 300w 120mm For Part Number 6500611
Gateway ATX12V Power Supply 300w 120mm For Part Number 6500611
Model: ATX-300P
$38.99

Specifications
Gateway ATX12V Power Supply 300w 120mm For Part Number 6500611

For Gateway p/n: POW145005AAWW, POW145006AAWW, POW145002AAWW, POW145004AAWW, 6500055, 6500470, 6500457, 6500525, 6500526, 6500841 6500563, 6500582, 6500583, 6500611, 6500612, 6500652, 6500684, 6500704, 6500340.

Also used as replacement for Gateway Part Number(s): POW145001AAWW, POW145002AAWW, POW145004AAWW, POW145006AAWW, ASTEC ATX250-3505, FSP300-60GI, FSP235-60GI, HIPRO HP-235ATXA6,  LITEON PS-5161-2G,  NEWTON NPS-160-CB-1, NEWTON NPS-200PB-119A,
NEWTON NPS-200PB-119B, NEWTON NPS-200PB-119C, NEWTON NPS-250EB B, NEWTON NPS-250CB A, NEWTON NPS-250CB B, NEWTON NPS-250HB A, PowerTronics PK-6145-DT, Power Tronics PK-6145DT-3 Power Supply.

Dimensions: 5.9 W x 3.4 H x 5.5 D - Inches

This power unit has (1) 20 pin ATX connector, (1) 6pin Auxiliary Power Connector, (1) ATX12V 4pin Square Peg Connector, (4) peripheral power connectors, and (2) DC drive connector.

Included Power Output Plugs for this Power Supply:

Features
 
  • High efficiency over 70%
  • Over-voltage protection
  • Over-current protection
  • Short-circuit protection
  • Approved by UL, CSA, TUV, NEMKO, CB & FCC
  • Internal 12 cm fan
  • MTBF: 100K hours at 25C
Specifications
   
Input Specifications
?Voltage:
 
110-120/220-240VAC
?Frequency: 47 Hz to 63 Hz
?Input current: 7 amps maximum / 115 Vrms, 60 Hz. 
3.5 amps maximum / 230 Vrms, 50Hz
 
Output Specifications
? Over-voltage protection: +3.3V (4.3V max.), +5V (7V max.),
12V1 (15.5V max.), 12V2 (15.5V max.)
? Over-current protection: +3.3V (65.0A max.), +5V (50.0A max.),
12V1 (21.0A max.), 12V2 (27.0A max.)
?Short circuit protection: The power supply is prevented from output over current.
?Remote ON/OFF control: The power supply shall accept a logic open collector level which
will disable / enable all output voltage (excluding +5V standby).
?Power good signal: 115V/230V (full load) 100 - 500 ms
 
General Specifications
?MTBF:
 
100K hours at 25C
?Efficiency: 70% min.
?Hold-up time: 17.0ms minimum at 115V/60Hz.,
17.0ms minimum at 230V/50Hz.
 
Environmental Specifications
?Temperature range:
 
operating 0C~50C, storage -20C~65C
?Humidity: 90~95% RH
?Dielectric strength: primary to frame ground 1800 VAC for 1 second,
primary to secondary 1800 VAC for 1 second